Common Problems in Using Anti Static Chair 2020-02-12
For the ESD Chair , there are usually some problems when using it . we collect information for you and provide the resloves for it.

1. How should avoid the foot cup and casters often scratching the floor?

For anti static chairs, foot cups and casters are necessary accessories. In daily use, you can put a customized anti-static rubber leather cover on the foot cup, or you can use the castors made of soft PU, which not only maintains the anti-static effect of the esd anti static chair, but also avoids scratches caused by the foot cup and casters on the floor.

2. there is a metal conductive chain in the accessories of anti static chair, Where does this need to be installed in the anti static chair?

Usually, the metal conductive chain is installed at the bottom of the lifting rod, which is the part of the anti static chair, to discharge the static electricity generated during use.

However, the conductive chain only plays an auxiliary role, and the whole system of the anti static chair has been able to release all the static electricity generated, so this metal conductive chain does not have to be used. and now many anti-static chair casters or foot cups are made of conductive nylon material, five-point grounding, you can stably release the static electricity generated in the use of anti-static chair.


3. why do anti static chairs have no armrests?
Scientific research shows that in the process of using the anti static chair, the larger the contact area is, the easier it is to produce static electricity.
Therefore, the anti static chairs sold on the market do not have armrests, of course, if there is a special need, anti static chairs can also be mass customized armrests.


4. what is the surface resistance of anti static chair?

According to the "measuring method of surface resistance", the anti static chair has a certain standard in terms of surface resistance, which is generally controlled between 10e4--10e11 Ω.

If some special working environment has special requirements for the surface resistance of the anti static chair, you can also contact the manufacturer for customization.
Hot Products
ESD Hollow Plate 2-12mm Conductive Polypropylene Corrugated Sheet Hollow Plate
Material:PP Size:Can be customized. ESD Type:10e6-10e9 Conductive Type:10e3-10e6
read more
ESD PE Foam Tray  conductive Tray for Packaging Usage ESD PE Foam Tray conductive Tray for Packaging Usage
ESD PE Foam Tray is made of PE foam material. cutting into all kindly of packaging tray for electronics packaging.
read more
Conductive Plastic Stackable Bins ESD Plastic Stackable Bins Conductive ESD Bins For Safe Packaging
ESD Plastic Stackable Bins, plastic stackable storage Bin, injection moulded conductive Bins, ESD Conductive Plastic Bins,which provides physical protection, with conductive material providing reliable path-to-ground.
read more
Send A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
welcome to CTFESD
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Home

Products

About

contact